Digiflow 8100T-G water flow meter rate counting down filters RO system 56"cable

Description

Digital Flow Monitor  (Counting Down, Alert)   Made by Digiflow USA
Counting down: set a volume in gallons then it starts counting down when water passing through it.  It will beep at the end of countdown. Counting down from: min 100 gal; max 9900 gal.
Elapse time: counting down, counting down from: min. setting 30 days,  max setting 720 days.
Real time Flow rate:  0.22 to 2.1 GPM (gallons per minute)  ** Minimum flow rate 0.22 GPM
Model: 8100T -G (gallon model)   (internal part no. FM-81cable)
Flow totalizing up to 2600 gallons or 9999 Liters
Flow rate display from 0.22 gallons per minute to 2.1 GPM
Connection:  1/4” NPT
Electrical:  3 DC Volt (two AA battery)   1.0mA (display mode) 0.015mA (idle)
Low battery power alert
Automatic data saving when battery is out
Reset button:  press and hold the button for 5 sec. to reset to zero
Material
:
Sensor body: Acetal copolymer, TICONA M90
Turbine:  Acetal Copolymer
Turbine shaft: #304 stainless steel
O-ring:  EPDM Rubber
Housing:  ABS resin
Specification
:
Dimension: (display) 2 3/4" x 2 1/4" x 1 3/8”
Cable length from sensor to display:  56 inches
Operating temperature: 40F to 172F  or 4 C to 80 C
Max operating pressure: 85 psi or 6 bar
Accuracy: +/- 10%